Manufacturer: Movella Manufacturer No: CA-USB-CONV Datasheet: MTi Cables: CA-USB-CONV Description: The CA-USB-CONV is a USB to RS232 converter that can be connected directly to the Molex connector of the 12-pin Host Interface cable. The RS232 converter uses the RxD, TxD, RTS and...

Manufacturer: Xsens Manufacturer No: CA-MP-MTI-12 Datasheet:  MTi Cables: CA-MP-MTI-12 Description:Provides access to all pins of the 12-pin ODU connector on the MTi-680G, MTi-670G, and MTi-630R The CA-MP-MTI-12 is a 12-pin Host Interface cable that consists of the following parts: Molex connector: 5054321201; 1.25mm...

Manufacturer: Movella Manufacturer No: ANT-P Datasheet: MTi Cables: ANT-P Description:  Active patch GPS/GLONASS antenna (SMA), 3 meter, no magnets (default antenna for MTi-G-710-DK and MTi-7-DK).  This high performance antenna, designed to operate at GPS and GLONASS frequencies, is ideally suited to telematics platforms used...

Manufacturer: Movella Manufacturer No: ANT-MULTI Datasheet: MTi Cables: ANT-MULTI  Description:  ANT-MULTI, Multi GNSS active patch antenna (SMA). Beidou, Galileo, GLONASS, GNSS, GPS Module RF Antenna. 3m. Ideal for high accuracy applications while providing high out of band signal rejection, this antenna is the smallest dual...

Manufacturer: Movella Manufacturer No: CA-MP-MTI-FLAT Datasheet:  MTi Cables: CA-MP-MTI-FLAT Description: Flat Ribbon Cable assembly (20cm) with one IDC connector, for standalone mounting on MTi Modules. Assembled IDC female connector, Rated Current: 1.2 A Cable Length: 20cm Cable Type: Flat-ribbon conductor

Manufacturer: Movella Manufacturer No: CA-USB-MTI Datasheet: MTi Cables: CA-USB-MTI Description: Xsens USB Cable to use the MTi-10&100 series modules with USB and SyncIn.  

Manufacturer: Movella Manufacturer No: CA-USB6-MTI Datasheet: MTi Cables: CA-USB6-MTI Description: Xsens custom made RS422-USB Converter Cable to use the MTi-10&100 series modules with USB and SyncIn. This cable also offers an interface via a virtual COM-port instead of WinUSB. Outer diameter: 0.85 +/-...

Manufacturer: Xsens Manufacturer No: CA-MP-MTI-4 Datasheet:  MTi Cables: CA-MP-MTI-4 Description: The CA-MP-MTI-4 is the RTCM corrections cable for the MTi-680G and MTi-670G, that consists of the following parts: Molex connector: 2045320401; 1.25mm pitch, single row, positive lock, 4 circuits ODU connector: A1CWAM-P04XBC0-0000; AMC...

Manufacturer: Movella Manufacturer No: CA-USB4-MTI Datasheet: MTi Cables: CA-USB4-MTI Description: Xsens custom made RS485-USB Converter Cable to use the MTi-10&100 series modules with USB and SyncIn. This cable also offers an interface via a virtual COM-port instead of WinUSB. Outer diameter: 0.85 +/- 0.10...

Manufacturer: Movella Manufacturer No: CA-USB2-MTI Datasheet: MTi Cables: CA-USB2-MTI Description: Xsens custom made RS232-USB converter cable to use the MTi-10&100 series modules with USB and SyncIn. This cable also offers an interface via a virtual COM-port instead of WinUSB. Outer diameter: 0.85...

Manufacturer: Movella Manufacturer No: CA-MP2-MTI Datasheet: MTi Cables: CA-MP2-MTI Description: Xsens custom made CA-MP2-MTi cable that allows for full control of MTi-10/100 series modules.  Outer diameter: 0.85 +/- 0.10 mm. The PUR jacket conforms to standard UL Style 20549.Minimum bending radius: 4.75 mm...

Manufacturer: Movella Manufacturer No: ANT-GNSS-RTK Datasheet: MTi Cables: ANT-GNSS-RTK  Description:  The supplied GNSS antenna in the MTi-670G/680G Starter Kit. Ideal for dual frequency positioning where minimizing weight is important, the 52-gram ANT-GNSS-RTK provides excellent axial ratio and tight Phase Centre Variation (PCV).The...